25% off software. The biggest discount of the year.

From 2D to 3D: Same Team, Double the Output!
TENADO METAL 3D at Stapfer Metallbau

How Stapfer Metallbau & Reparaturen GmbH plans custom structures in one continuous workflow and completes more than twice as many projects with the same team
Bicycles parked inside a modern, black metal-frame shelter designed using 3D planning for metal fabrication in a park.

Headquarters in Dietikon, Switzerland

42 total employees

Founded in 2007

Industry: Metal fabrication 

Download the white paper

Stapfer Metallbau & Reparaturen GmbH at a Glance

Based in Dietikon, Stapfer Metallbau & Reparaturen GmbH manufactures stairs, railings, balconies, canopies, and smaller structures made of steel and stainless steel. Repair work is a particular strength of the company: Drawing on years of experience, the team can assess many situations on the spot and recommend whether a repair is worthwhile, or a component should be replaced.
Around 95% of orders are one-off projects, many in existing buildings, where walls and angles are rarely square. Almost every project therefore presents the team with a new design challenge. The production planning team handles each order from quotation through site measurement and design to the workshop drawing.

Challenge

Before adopting TENADO CAD software, part of the planning process relied on hand-drawn sketches. Because these were not to scale, there was no reliable way to check designs before fabrication. Workpieces sometimes did not fit on the first attempt and had to be adjusted in the workshop or on site.
In metal fabrication, these errors lead to substantial follow-up costs: In addition to extra material, they require further site visits and installation hours, cause schedule delays, and affect the impression made on customers. This additional work is generally not compensated.
With TENADO METAL 2D, Stapfer Metallbau & Reparaturen GmbH had already significantly reduced its error rate. However, each view had to be drawn individually and updated separately whenever changes were made. If a change was not incorporated into every view, discrepancies and questions arose. For complex one-off projects, this exposed the limitations of two-dimensional planning.

Outcome

Today, TENADO METAL 3D forms the foundation of the entire planning process. A central 3D model generates views, workshop drawings, material lists, STEP files for suppliers, and visualizations for customers. Changes no longer have to be updated in multiple places.
The model makes it possible to check whether a structure will work under real-world conditions. As a result, it has almost eliminated on-site rework. At the same time, the team completes more than twice as many projects per week with the same staffing as it did when using 2D planning.

One Model for the Entire Planning Process

Two employees work directly in TENADO METAL 3D, developing the model as soon as a project takes shape. This model generates drawings for the workshop and installation team, the material list, and STEP files for external suppliers. All documents are based on the same design and don’t need to be maintained or checked separately.
The metal fabrication libraries, dedicated metal fabrication functions, and, above all, drawing with materials were key reasons for choosing TENADO METAL 3D: Material information is directly linked to each component, so the design generates the material list. The libraries include standard profiles and frequently used components. Because TENADO METAL 2D was already in use, employees were familiar with the software’s workflow and could start without a complete break from the existing system.
Automatically generated views also boost productivity: The team designs each component once in 3D, keeping the required documents consistent. Given the variety of projects, an exact comparison of the time spent on each design would not be meaningful.
“TENADO METAL 3D is not a tool for an individual step in the workflow; it is the foundation for the entire planning process.”
Patrick Zuppinger, Production Planning and Project Management at Stapfer Metallbau & Reparaturen GmbH
A steep outdoor staircase at night, illuminated by lights mounted along the handrail and building, presented as a 3D planning visualization for metal fabrication.

Detecting Errors Before They Cause Costs on Site

For Stapfer Metallbau & Reparaturen GmbH, the greatest advantage of 3D planning is checking designs before fabrication. For stairs and railings in existing buildings, where walls are rarely straight and angles rarely square, the model immediately shows whether the structure will work. Problems that might not have become apparent until installation can now be addressed during production planning.
On-site rework, which was required several dozen times a year when hand-drawn sketches were used, is now almost nonexistent. This saves material and avoids additional trips, working hours, and schedule delays.
“I can see from the model whether a structure will work before a single piece of material is cut.”
Patrick Zuppinger, Production Planning and Project Management at Stapfer Metallbau & Reparaturen GmbH

Clear Documents for the Workshop, Suppliers and Customers

The 3D drawings are easier to understand in the workshop and during installation. Before fabrication begins, employees can see what the complete component should look like rather than piecing it together mentally from multiple individual views. This reduces questions for the production planning team and helps workshop operations run more smoothly.
Suppliers benefit too: STEP exports give them the geometry directly, so they don’t have to interpret a drawing. This largely avoids misunderstandings and follow-up questions. Customers can see what their railing or another structure will look like in 3D before fabrication begins. This makes decisions easier during sales discussions. With less rework, promised deadlines can be met more reliably.
“That is the most honest feedback you can get: When nobody calls with questions anymore, the drawing is right.”
Patrick Zuppinger, Production Planning and Project Management at Stapfer Metallbau & Reparaturen GmbH

Implementation Supported by Training and Personal Support

The implementation of TENADO METAL 3D included two two-day on-site training sessions. Afterward, the team worked largely independently, with targeted support for specific design questions. Stapfer Metallbau & Reparaturen GmbH particularly values personal contact with specialists who understand both the software and metal fabrication.
A multi-story apartment building with dark siding and stacked balconies featuring light-colored panels, depicted in a 3D planning model for metal fabrication.
Black spiral staircase for metal fabrication in the center of a living room with a white sofa and parquet floors.
Curved metal bars clamped to a steel beam in a workshop during 3D planning for metal fabrication.

Key Results at a Glance

More than twice as many projects
With the same staffing compared with 2D planning.
Almost no on-site rework
From several dozen cases a year to almost zero.
Checks before fabrication
Structures can be checked before material is cut.
A consistent data foundation
Views, workshop drawings and material lists are generated from a central model.
Fewer questions
Clearer drawings and STEP files ease the workload for production planning, the workshop, installation teams and suppliers.
Visual customer consultations
3D visualizations make decisions easier before fabrication.

More Potential for Custom Metal Fabrication Projects

For Stapfer Metallbau & Reparaturen GmbH, TENADO METAL 3D’s strength lies in combining 3D design checks, metal fabrication libraries, material lists, consistent workshop drawings, STEP exports, and customer visualizations, all based on a central model. Metal fabrication businesses with a high proportion of custom orders benefit in particular: The more often designs have to be developed from scratch and adapted to different site conditions, the greater the impact of improved checks and a continuous data foundation.
“For a traditional metal fabrication business handling custom orders, I would recommend TENADO without hesitation.”
Patrick Zuppinger, Production Planning and Project Management at Stapfer Metallbau & Reparaturen GmbH

Get Started with TENADO METAL 3D

Would you like to find out how TENADO METAL 3D can support your design processes? Schedule a personal live demonstration and discover how to plan custom metal fabrication projects more precisely and generate workshop documents in one continuous workflow from a central model.